In some large multimedia conference rooms, the use of LCD screen as an image display device is already a basic configuration. Multiple LCD splicing screens are often used as a large screen. In this case, splicing will be used. Traditional LCD screens The video wall can only splicing large screens and cannot switch the input video signal, so it cannot meet the needs of multimedia conference rooms. Therefore, it is necessary to use a matrix to support both signal switching and splicing functions. The splicing function of Modular HD Matrix Switcher is just enough.

How is the video wall function of the Modular HD Matrix Switcher realized?

1. To realize the video wall of the LCD screen, both the matrix host and the output board can meet the function of video wall;

2. It is necessary to connect each LCD splicing screen to the output board of the matrix host, and insert the input signal source into the input board. , enter the control switching interface through the control computer, and then realize video signal switching, scene saving, and video wall functions;

3. Create a video wall in the control switching interface, you can build multiple video walls at the same time, after the video wall is built, you only need to put The output interface connected to the LCD splicing screen is pulled into the established video wall to realize the video wall of the LCD screen, and the video wall function of theModular HD Matrix Switcher is completed.

The splicing function of Modular HD Matrix Switcher is not only applicable to HD output boards and DVI output boards, but also VGA, HDBaseT, and SDI. At the same time, it can also be connected to the intelligent central control host to achieve unified control switching, and then video wall can also be used.