BeingHD

product center

Contact us

  • 5F, Huigu Science&Technology Park, Northing Ring Road No.28, Shiyan Town, Baoan Shenzhen, China, 518000
  • rocky@beinghd.com
  • +86-13641415819

Popular information

  • H.265 HDMI over IP System
  • H.265 HDMI over IP System

H.265 HDMI over IP System

The encoder(IPM-900T) and decoder(IPM-900R) can work together to provide complete end-to-end streaming system or it can work with the network switch to realize a one to many, many to one and many to many systems.

inquiry

Introduction

The encoder(IPM-900T) and decoder(IPM-900R) can work together to provide complete end-to-end streaming system or it can work with the network switch to realize a one to many, many to one and many to many systems. It can transmit the video, audio and RS232 signals together or separately over single LAN cable, with the POE function, the Rx and Tx can be powered by POE from a POE network switch, it helps to make the installation more clean and professional. Except working as the matrix switch and distribution systems, it also supports the video wall function with maximum configuration of 7x7 Video wall. The resolution of this system can up to 1920x 1080@60Hz, and the TX plus RX will need to less than 50 points in total, if need the unlimited numbers of the TX and TX will need to move to the broadcast version.

This system can support friendly-user control options, including RS232, IP control box, PC software, iPad APP control with Source&Videowall preview function. The decoder also support the CEC/RS232 function to power on and off displays.

This system can be popularly used in the hospital, school, shopping mall, hotels, command center and corporate training etc.

Real shot products

H.265 HDMI over IP System
H.265 HDMI over IP System
H.265 HDMI over IP System
H.265 HDMI over IP System

Features

· Transmits the HDMI over IP

· The resolution can up to 1920 x 1080@60Hz.

· Auto scaling function from 480p@60Hz to 1080@60Hz

· One push-key to read the IP address of each unit 

· 50 points in total of the Rx plus Tx(Unicast version)

· Supports sources and TV Wall and sources preview functions on an iPad APP

· Featured video wall up to the configuration of 7x 7 video wall

· No need the IP control box (IPM-MG)

· Supports firmware upgrade online

· Supports 3-pin audio de-embedded function on both of the Tx and Rx

· Allows video, audio and RS232 signals to be routed together or separately.

· Supports EDID importing to encoder and export from display to decoder.

· Supports CEC/RS232 function to power on and off the display.

· HDCP compliant, HDCP1.4, HDMI1.3

· Supports seamless switch with no black/blue screen while sources switching

· Supports POE function or use the DC power adapter

· Supports Auto IP(zeroconf), dynamic IP or static IP address settings

· Supports communications protocols such as H.264/ H.265, TCP/IP, Telnet, UDP and IGMP

Technical Parameters

Encoder

Video
Input Video Port 1 x HDMI
Input Video Type HDMI 1.3, HDCP 1.4
Input Resolution 640 x 480@60Hz, 480p@60Hz,576i@50Hz, 576P@50Hz, 800 x 600@60Hz, 1024 x 768@60Hz, 720p@50Hz, 720p@60Hz, 1280 x 800@60Hz,
1280 x 1024@60Hz, 1360 x 768@60Hz,
1366 x 768@60Hz, 1400 x 1050@60Hz,
1440 x 900@60Hz, 1680 x 1050@60Hz,
1920 x 540@60Hz, 1080i@50Hz, 1080i@60Hz, 1080p@50Hz, 1080p@60Hz
Input Video Signal 0.5~1.2 V p-p
Encoding Data Rate Up to 30 Mbps, configurable
Output Video Port 1 x LAN
Output Video Type H.264/ H265 /MPEG-4 AVC
Output Resolution From 480p@60Hz to 1920 x 1080@60Hz
Video Impendence 100 Ω
Input DDC Signal 5 V p-p (TTL)
End-to-End Time Latency When works with decoder:
· About 50 ms (Low latency mode)
· About 250 ms (High quality mode)
Audio
Input Audio Port 1 x HDMI
Input Audio Format LPCM 2.0
Output Audio Port 1 x 3-pin Phoenix connector
Output Audio Format Stereo
Control
Control Method iPad APP
General
Operating Temperature +32°F ~ +113°F (0°C ~ +45°C)
10% ~ 90%, non-condensing
Storage Temperature -4°F ~ 140°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Power Supply 12 V 1 A DC
Power Consumption 6W (Max.)
ESD Protection Human body model:
· ±8kV (air-gap discharge)
· ±4kV (contact discharge)
Surge Protection Voltage: ±1 kV
Product Dimensions
(W x H x D)
175 mm x 25 mm x 100.2 mm / 6.9'' x 0.98'' x 3.9''
Net Weight 0.60kg / 1.32lb

Decoder

Video
Input Video Port 1 x LAN
Input Video Type H.264/ H.265/ MPEG-4 AVC
Input Resolution From 480p@60Hz to 1920x1080@60Hz
Output Video Port 1 x HDMI
Output Video Type HDMI 1.3, HDCP 1.4
Output Resolution 640 x 480@60Hz, 480p@60Hz, 576P@50Hz,
800 x 600@60Hz, 1024 x 768@60Hz, 720p@50Hz, 720p@60Hz, 1280 x 800@60Hz, 1280 x 1024@60Hz,
1366 x 768@60Hz, 1400 x 1050@60Hz,
1440 x 900@60Hz, 1680 x 1050@60Hz,
1920 x 540@60Hz, 1080p@24Hz, 1080p@25Hz, 1080p@30Hz, 1080p@50Hz, 1080p@60Hz
Video Impendence 100 Ω
End-to-End Time Latency When works with encoder:
· About 50 ms (Low latency mode)
· About 250 ms (High quality mode)
Audio
Input Audio Port 1 x LAN
Input Audio Format Audio embedded in streaming media input
Output Audio Port 1 x Phoenix connector
1 x HDMI
Output Audio Format LPCM 2.0
Control
Control Method iPad APP
Control
Operating Temperature +32°F ~ +113°F (0°C ~ +45°C)
10% ~ 90%, non-condensing
Storage Temperature -4°F ~ 140°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Power Supply 12 V 1 A DC
Power Consumption 6W (Max.)
ESD Protection Human body model:
· ±8kV (air-gap discharge)
· ±4kV (contact discharge)
Surge Protection Voltage: ±1 kV
Product Dimensions
(W x H x D)
175 mm x 25 mm x 100.2 mm / 6.9'' x 0.98'' x 3.9''
Net Weight? 0.60kg/1.32lb

Application

Matrix Switcher

Matrix Switcher

Video Wall

Video Wall

Connection diagram

Connection diagram

Get A Quote Today

  • *
  • *
  • *
Copyright© 2018 Shenzhen BeingHD Electronics CO., LTD. All Rights Reserved Privacy statement Terms & conditions Sitemap CNZZ
X